Page 1
INSTALLATION MANUAL LED TV* Please read this manual carefully before operating your set and retain it for future reference. UV3***-U* 75/86UU3***-U* www.lg.com...
TABLE OF CONTENTS TABLE OF CONTENTS LOCATION AND FUNCTION OF CONTROLS Parts and Button EZMANAGER LANGUAGE & COUNTRY SELECTION INSTALLATION MENU INTRODUCTION PUBLIC DISPLAY SETTINGS - Public Display Settings Operation - Power On Status - Volume - Key Management - Limited Mode - DTV Channel Update - Power On Default - Aux Source Setting...
LOCATION AND FUNCTION OF CONTROLS LOCATION AND FUNCTION OF CONTROLS Parts and Button • Image shown may differ from your TV. Screen Remote control and Intelligent sensors Power Indicator Button Button 1 Intelligent sensor - Adjusts the image quality and brightness based on the surrounding environment.
EZMANAGER EzManager • Image shown may differ from your TV. LANGUAGE & COUNTRY SELECTION - Please select the Language and Country. Some countries need to select the Time Zone.
The abundant functions for Hotel TV linked with software installation can be projected on OSD as ‘Installation Menu’ . The wide range of hotel features can be performed simply on additional window to enhance the LG hotel TV’s easy installation and convenient operation for Hotelier and System Integrators.
INSTALLATION MENU PUBLIC DISPLAY SETTINGS 1 Use the button to select the PUBLIC DISPLAY SETTINGS. 2 Use the ‘OK’ button and then button to select Public Display Mode. - When ‘Public Display Mode’ is set to On (Work), all functions of Public Display Mode apply. Public Display Settings Operation - Decide to work all functions of ‘Public Display Mode’...
Operation’ and ‘Local Key Operation’ will be worked by below. IR Operation • Decide whether work the LG remote control or not. - When ‘IR Operation’ is set to ‘Normal’ , all remote keys are available. - ‘Use PWR Only’ makes block all remote keys except power key.
INSTALLATION MENU Limited Mode - Configure TV function’s limitation. When selected to ‘On’ , following sub-menus will be worked by below. Setup Menu - Permit to tune and manage Channels as ‘On’(permitted) or ‘Off’(not permitted). Channel Change • Decide to change channel or not by setting ‘Program Change’ as ‘On’(Change Possible) or ‘Off’(Change Impossible) when present source is TV.
INSTALLATION MENU DTV Channel Update - It is a mode to set whether to update dtv Channel automatically or not. - When DTV Channel Update is set to ‘Auto’ , the function to update TV’s Channel map according to dtv Channel’s stream information. - DTV Channel Update is set to ‘Manual’...
INSTALLATION MENU NETWORK (Depending on model) button to select the NETWORK. 1 Use the MAC Address - Displays the MAC address (not customizable). Network Setting One-click network connection - Connects easily to a wired/wireless network. - Network Connection to connect to an available network automatically. Follow the prompts on the TV.
INSTALLATION MENU Wake On LAN • Sets the Wake On LAN function to Enable or Disable. - The Wake On LAN feature enables the TV to receive software updates and/or be powered ON upon receipt of Wake Up Frame packets and/or Magic Packet data via the wired LAN. To facilitate use of this feature, note that the appropriate wired connection must be made.
INSTALLATION MENU GENERAL Configuration Setup Select RCU - It is a mode to set whether to use Select RCU or not. When ‘Select RCU’ is set to ‘Enable’ , You can adjust ‘Number of RCU’ menu. Number of RCU - It is a mode to set Number of RCU. Number of RCU value range 1~9.
Page 13
INSTALLATION MENU USB Auto Playback (Depending on model) - When ‘USB Auto Playback’ is set to ‘Movie’ , TV finds and plays the USB’s movie files located at the root(top) directory Movies if USB is plugged in. - When ‘USB Auto Playback’ is set to ‘Photo’ , TV finds and plays the USB’s photo files located at the root(top) directory Photos if USB is plugged in.
INSTALLATION MENU External Speaker Volume Control - Selects the volume control method of an external speaker. You can select ‘Off’ , ‘Int Variable’ , ’ Fixed. ’ , ’ Ext Variable’ by ^ pressing button. Ext Variable uses the External Vol Up/Down Control Line to change the volume up to 1 Watts. Int variable is linked to the main volume OSD and change the volume 0 - 1 Watts.
CEC Mode - You will have 3 modes to choose [Default], [HCEC] and [TVLink-CEC]. - If [Default] is selected, you can use SIMPLINK which is provided in LG TV. Also you can enable and disable SIMPLINK through SIMPLINK MENU. - If [HCEC] is selected, you can use TVLink-HCEC Protocol. For more detailed information, please refer to TVLink-HCEC Protocol document) - If [TVLink-CEC] is selected, TV will not directly work for key input except for power key.
INSTALLATION MENU StandBy - Set the sending and receiving scenario of OpStandBy(0x0c) command. - Ths detailed scenario is described on the table below. Send Receive Send Only Receive Only Forced Initialize - This setting will be enabled When CEC mode is set as ‘TVLink-CEC’ - If ‘Enable”...
INSTALLATION MENU * Input (Depending on model) - You can select 'Input' according to 'Clock Source' . - You can select TV source when Clock Source is 'TV' . - Input is set to 'None' , 'HCAP' , 'Protocol' , 'HTNG' automatically when Clock Source is 'Admin' . * Program/Frequency (Depending on model) - You can select Program when Clock Source is 'TV' * Timezone(City) /Timezone(Custom) /Timezone(Offset) (Depending on model)
INSTALLATION MENU * Reset - Delete Downloaded video file * Operation - The video displays after your TV is turned on and the boot logo appears - If Welcome Video is enabled and a video is downloaded on the TV, the video plays - The time it takes a video to be displayed may differ depending on the decoding time of the video.
Page 19
INSTALLATION MENU Ez Download - Ez Download is a function that enables users to download the desired items all at once, such as EPK (software update file), TLL, Logo Image, Background Images, Micom. * Images and EPK files should be copied into the folder named LG_DTV on the USB. - TLL files should be copied to the root folder of the USB.
Page 20
INSTALLATION MENU Logo Image Download - If there are more than two USB Memory Device, It is possible to select the USB. - The download sequence is Logo Image Download -> Select Image -> UPDATE. NOTE • Splash Image update function supports only JEPG,BMP format file of less than 8 MB filesize. •...
Page 21
INSTALLATION MENU Update TV Software - This feature update EPK of TV through the hex file in USB. The target file is located in \LG_DTV folder. - If there are more than two USB memory Device, It is possible to select the USB. - The download sequence is Update TV Software ->...
Page 22
INSTALLATION MENU Update Micom Software - This feature update MICOM of TV through the txt file in USB. The target file is located in \LG_DTV folder - If there are more than two USB memory Device, It is possible to select the USB. - The download sequence is Update Micom Software ->...
Page 23
INSTALLATION MENU Import Clone File - Once the internal TV data and its channel map information is written to the USB memory card, the user can start “Import Clone File” process with the data file generated and stored in USB memory card.
Page 24
INSTALLATION MENU Export Clone File - "Export Clone File” must be done first before “Import Clone File” process, as it generate the file to be used in “Export Clone File”. While writing is in process, the user must not turn TV off nor unplug the USB memory card.