Planar GX2MP User Manual page 29

Problem
Display image is
incorrect.
Possible Cause
Display position is
incorrect.
On the screen
background, the
vertical bars or stripes
are visible.
Horizontal noise that
appears in any image
or characters is not
clearly portrayed.
The screen color is
mono or abnormal.
The screen blinks.
Solution
Press AUTO/SET to automatically adjust
your display image to the ideal setting. If
the results are unsatisfactory, adjust the
image position using the H position and
V position icon in the on screen display.
Check Control Panel > Display > Settings
to see if the frequency or the resolution
were changed. If yes, readjust the video
card to the recommend resolution.
Press AUTO/SET to automatically adjust
your display image to the ideal setting. If
the results are unsatisfactory, decrease the
vertical bars or stripes using the CLOCK
icon in the on screen display.
Press AUTO/SET to automatically adjust
the display image to the ideal setting. If
the results are unsatisfactory, decrease the
horizontal bars using the PHASE icon in
the menu. Check Control Panel > Display >
Settings to adjust the display to the
recommended resolution or adjust the
display image to the ideal setting. Set
the color setting higher than 24 bits
(true color).
Check if the signal cable is properly
connected. Make sure the video card is
properly inserted in the slot. Set the color
setting higher than 24 bits (true color) at
Control Panel > Display > Settings.
Check if the screen is set to interlace
mode. If yes, change it to the recommend
resolution. Make sure the power voltage is
high enough. It must be higher than
AC100-240V 50/60Hz.
Troubleshooting | 19