ASSEMBLY INSTRUCTIONS
Introduction
The Clean Pole is a product designed to be used with the Clean Screen computer workstation.
Assembly Instructions
Tools Needed
To assemble the Clean Pole, you will need a Phillips head screwdriver, two Allen wrenches
(found in box), and the bags of screws (found in box).
Step 1. Remove the Unit
To remove the Clean Pole power unit and star base from the
shipping carton, remove packaging from around the Clean Pole.
WARNING
Cut tie wraps holding star base to the pallet.
Wheel Clean Pole down ramp. Be careful – this Clean Pole System
is heavy. To prevent mishap, we suggest two people assist with
removing the base from the shipping carton.
6
Clean Pole Installation and User's Guide
The carton has a built-in ramp that comes down when the
cardboard lid is removed. Be careful that it doesn't fall on the
assembler when removing the lid.