Control Lock - LG LTEL7337F.BRSLLGA Owner's Manual

2
To adjust the lower oven, press the Start
Time button repeatedly until
a
in the display.
To adjust the upper oven, press the Start
Time button repeatedly until
a
in the display.
3
Use the number buttons
number of degrees you want to adjust the
oven temperature. The temperature
adjustment is shown next to
You can adjust the temperature up or down
by 35 °F or 19 °C.
4
To lower the temperature, press Start Time
to add a minus sign (-) to the displayed
a
number. To raise the temperature, press
Start Time to remove the minus sign in the
a
display.
5
Press START to accept the change.
e
NOTE
• This adjustment does not affect the broiling or
Self Clean temperatures. The adjustment is
retained in memory after a power failure. The
oven temperature can be adjusted by ±35 °F (±19
°C).
• Once the temperature is adjusted, press Start
Time repeatedly until
to see the amount you adjusted and change it if
needed.
• The temperatures displayed by an oven
thermometer placed in the oven cavity may
differ from the actual set oven temperature in all
modes.
Turning the Preheat Alarm Light On/
Off
When the oven reaches its set-temperature, the
preheating alarm light flashes 5 times or until the
oven door is opened.
You can activate or deactivate the preheating
alarm light.
1
Press and hold the Start Time button for 3
seconds. Press the Start Time button
repeatedly until
PrE
2
Press 1 repeatedly to select the light on/off.
shows
L_AJ b
shows
U_AJ b
to enter the
c
or
U_AJ L_AJ d
or is displayed
U_AJ L_AJ
appears in the display.
3
Press START to accept the change.
Adjusting the Beeper Volume
1
Press and hold the Start Time button for 3
seconds. Press Start Time repeatedly until
appears in the display.
8EEP
2
Press 1 repeatedly to select Hi, Lo or Off.
.
3
Press START to accept the change.
NOTE
• Adjusting the beeper volume does not affect the
preheat alarm volume.
Selecting Fahrenheit or Celsius
Set the oven temperature display to show either
Fahrenheit (℉) or Celsius (℃) units. The oven
defaults to Fahrenheit unless changed by the user.
1
Press and hold the Start Time button for 3
seconds. Press the Start Time button
repeatedly until
2
Press 1 repeatedly to select F (Fahrenheit) or C
(Celsius).
3
Press START to accept the change.
Adjusting Cooktop on Alert Volume
1
Press Start Time repeatedly until
appears in the display.
2
Press 1 to select Hi, Lo or Off.
3
Press START to accept the change.

Control Lock

The Control Lock feature locks the control panel
and oven mode knob, but does not lock the oven
door.
• When the Control Lock feature is activated, the
cooktop and oven mode knob do not operate.
OPERATION
appears in the display.
UNit
CtOP
27