Epson WF-3620 Series User Manual page 157

User's Guide
Code Problem
325 There is not enough storage space available to
save the data in the specified folder.
425
327 The memory is full.
328 The destination was wrong or the destination did
not exist.
428
331 A communication error occurred while acquiring
the destination list.
332 There is not enough storage space available to
save the scanned data in the destination storage.
333 The destination could not be found because the
destination information has been changed
before sending the scanned data.
334 An error occurred while sending the scanned
data.
341 A communication error has occurred.
Error Indicators
Solution
Increase the storage space.
When scanning to a folder, reduce the number of documents or
change the following settings to reduce the size of the scanned
data.
- Select a lower resolution.
- Select a higher Compression Ratio.
Wait until other ongoing jobs are finished.
Check the entered folder path, the user name, and the password
is correct.
Make sure the product is connected to the network correctly. For
details, see the Network Guide.
Reduce the number of documents.
Select the destination again.
-
Make sure the product is connected to the computer or network
correctly. For details, see the Network Guide.
When you are using Scan to Computer, make sure you have
installed Epson Event Manager.
"Installing the software" on page 148
&
157