uuIndicatorsu
Indicator
Name
Transmission
System
Indicator
Seat Belt
Reminder
Indicator
*1:Models with the smart entry system have an ENGINE START/STOP button instead of an ignition switch.
* Not available on all models
80
On/Blinking
Comes on for a few seconds when
●
you turn the ignition switch to ON
(
w
*1
, then goes off.
Blinks if the transmission system
●
*
has a problem.
Comes on and the beeper sounds
●
if you are not wearing a seat belt
when you turn the ignition switch
to ON
(
w
*1
.
If the front passenger is not
●
wearing a seat belt, the indicator
comes on a few seconds later.
Blinks while driving if either you or
●
the front passenger has not
fastened a seat belt. The beeper
sounds and the indicator blinks at
regular intervals.
Explanation
Blinks while driving - Avoid sudden
●
starts and acceleration and have your
vehicle checked by a dealer immediately.
The beeper stops and the indicator goes
●
off when you and the front passenger
fasten their seat belts.
Stays on after you or the front
●
passenger has fastened the seat belt
- A detection error may have occurred in
the sensor. Have your vehicle checked by
a dealer.
2 Seat Belt Reminder P. 40
Message
*