Honda CIVIC SEDAN 2018 Owner's Manual page 482

uuWhen DrivinguTire Pressure Monitoring System (TPMS)
Low Tire Pressure/
TPMS Indicator
TPMS
Button
* Not available on all models
480
Models with information display
Press and hold the TPMS button until the low
tire pressure/TPMS indicator blinks twice,
indicating the calibration process has begun.
• If the low tire pressure/TPMS indicator does
not blink, confirm the above conditions
then press and hold the TPMS button again.
• The calibration process finishes
automatically.
Models with color audio system
Models with driver information interface
You can calibrate the system from the customized
features on the driver information interface.
1. Press the then /
3 4
(Vehicle Settings), then press the
ENTER button.
u TPMS Calibration appears on the display.
2. Press the ENTER button.
u The display switches to the
customization setup screen, where you
can select Cancel or Calibrate.
3. Press the / button and select
3 4
Calibrate, then press the ENTER button.
u Calibration Started screen appears,
then the display returns to the
customization menu screen.
• If the Calibration Failed to Start message
appears, repeat steps 2-3.
• The calibration process finishes automatically.
1TPMS Calibration
•
TPMS cannot be calibrated if a compact spare tire
is installed.
•
The calibration process requires approximately 30
minutes of cumulative driving at speeds between
30-65 mph (48-105 km/h).
•
During this period, if the ignition switch is turned to
ON ( w *1
seconds, you may notice the low tire pressure
indicator comes on briefly. This is normal and
indicates that the calibration process is not yet
complete.
If the snow chains are installed, remove them before
calibrating the TPMS.
button to select
If the low tire pressure/TPMS indicator comes on even
when the properly inflated specified regular tires are
installed, have your vehicle checked by a dealer.
We recommend that the tires be replaced with the
same brand, model, and size as the originals. Ask a
dealer for details.
*1: Models with the smart entry system have an ENGINE
START/STOP button instead of an ignition switch.
and the vehicle is not moved within 45
*