Models with smart entry system
Message
Appears if you push the ENGINE START/STOP
Continuously
●
variable
button to turn the engine off without the shift lever
transmission
in
(
P .
models
Appears when the power mode is in ACCESSORY.
●
Appears after the driver's door is opened when the
●
power mode is in ACCESSORY.
Appears when you close the door with the power
●
mode in ON without the smart entry remote inside
the vehicle.
Appears when the smart entry remote battery
●
becomes weak.
Appears if the smart entry remote battery is too
●
weak to start the engine or the key is not within
operating range to start the engine.
A beeper sounds six times.
uuIndicatorsuDriver Information Interface Warning and Information Messages
Condition
Explanation
U.S. models
Move the shift lever to
P . The power mode changes to
(
●
VEHICLE OFF.
Canadian models
Move the shift lever to
(
P , then press the ENGINE
●
START/STOP button twice.
—
Press the ENGINE START/STOP button twice with your
●
foot off the brake pedal (continuously variable
transmission) or the clutch pedal (manual transmission)
to change the power mode to VEHICLE OFF (LOCK).
Disappears when you bring the smart entry remote back
●
inside the vehicle and close the door.
2 Smart Entry Remote Reminder P. 166
Replace the battery as soon as possible.
●
2 Replacing the Button Battery P. 562
Bring the smart entry remote in front of the ENGINE
●
START/STOP button to be touched with.
2 If the Smart Entry Remote Battery is Weak P. 595
*
Continued
101