Related Manuals for Kogan SMARTERHOME LX18 PRO
Summary of Contents for Kogan SMARTERHOME LX18 PRO
- Page 1 KOGAN SMARTERHOME™ LX18 PRO ROBOT VACUUM AND MOP CLEANER WITH AUTO-EMPTY DOCK KAVACRBL18P...
-
Page 2: Table Of Contents
Safety & warnings Components Overview Assembly Before first use Connect to SmarterHome Google home control Amazon Alexa control Operation Cleaning & care Specifications Troubleshooting Notes... -
Page 3: Safety & Warnings
SAFETY & WARNINGS Ensure to read all instructions and warnings in this user guide prior to first use. Retain this user guide for future reference. • The vacuum can be used adults and by persons with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge if they have been given supervision or instruction concerning use of the vacuum in a safe way and understand the hazards involved. - Page 4 • Do not use the appliance if the cord or plug is damaged. If the appliance is not working properly, has been dropped, damaged, left outdoors, or submerged in water, cease use immediately and contact help.Kogan.com • Do not handle the plug or appliance with wet hands.
- Page 5 • Do not use the appliance if any of the openings are blocked. Keep it free from dust, lint, hair, and anything else that may restrict airflow. • Keep hair, loose clothing, fingers, and all body parts away from the openings and moving parts of the appliance.
-
Page 6: Components
COMPONENTS Robot vacuum cleaner Auto-empty dock Dustbin/Water tank Mopping module Cleaning brush Mopping cloth Left side brush (x2) HEPA & Sponge filters Right side brush (x2) -
Page 7: Overview
OVERVIEW Filter cover Dustbin Wall button sensor Reset button... - Page 8 Sensors Laser radar Radar anti-collision sensor Infrared sensor Wall sensor Anti-collision sensor Underside Cliff sensor Charging contact Universal wheel Side brush Battery cover Drive wheel Rolling brush Rolling brush cover...
- Page 9 Auto-empty Dock Dustbin Display Dust collection chute Infrared lens Dust collection chute Charging contacts Air outlet Power cord...
- Page 10 Button functions Home button Power button Power button • Press the button to start cleaning • Press and hold the for 3 seconds to power ON/OFF • Press and hold the for 15 seconds to force a shutdown (abnormal circumstances). Home button •...
- Page 11 Auto-empty Dock Display Charging indicator Dust collection indicator Dust full indicator Dust collection indicator Status Icon Indicator Text Collecting dust Flashing Vacuum empty Solid Green Abnormal Solid Green Flashing Charging indicator Status Icon Indicator Text Charging Flashing Green Not charging Solid Green Abnormal Solid Green...
-
Page 12: Assembly
ASSEMBLY Remove any protective material from the vacuum. Attach the left and right side brushes (L, R) to the corresponding letter on the underside of the vacuum. There should be a clicking sound when each side brush is secured. Install the Auto-empty Dock Place the auto-empty on a flat surface. - Page 13 Ensure there is a 50cm clearance either side, and 150cm clearance in front of the auto-empty dock. Connect the power cord into an electrical outlet. 50cm 50cm 150cm...
- Page 14 Install the Mopping Module and the Dustbin/Water tank Attach the mopping cloth to the underside of the mopping module. Note: For optimal results, clean the mopping cloth after each use. Open the plug and fill the water tank with clean water. Note: Do not add any detergents to the water tank.
- Page 15 Insert the mopping module into the vacuum. Removing the Mopping Module & Dustin/Water tank When the vacuum is finished cleaning, press the clasp on both sides and remove the mopping module by pulling is away from the vacuum. Clean the mopping cloth. Press the button in the middle of the dustbin/water tank and pull it away from the vacuum.
-
Page 16: Before First Use
BEFORE FIRST USE Checks to the area Ensure there are no loose wires or cables scattered on the ground. This is to prevent the vacuum becoming entangled or dragged along. Ensure all fragile items, those easy to topple, dangerous items, and valuables are removed. This is to prevent items being damaged and personal injuries. -
Page 17: Connect To Smarterhome App
CONNECT TO SMARTERHOME™ APP Install App Download the “Kogan SmarterHome” app from the Play Store (Android) or App Store (iOS). Play Store (Android) App Store (iOS) To register: If you already have a SmarterHome account, select ‘Log In’. To register a new account, select ‘Sign Up’. - Page 18 Set device in pairing mode When the device is first turned on, it may automatically enter pairing mode (both buttons are slowly flashing purple). If not automatically in pairing mode when powered on, you can manually set the device in pairing mode by pressing and holding the home and power buttons simultaneously for 3 seconds until they begin slowly flashing purple and the voice prompt “Wi-fi lost, please follow the App instructions for reconnection”...
- Page 19 Adjust your connection method by tapping on the mode type in the top-right corner of the screen. Select “AP Mode” for the set-up type. Ensure that the device is in pairing mode, with the power and home buttons are slowly flashing purple, select “Confirm indicator is slowly blink” and tap “Next”. Follow the in-app prompts to continue AP Mode connection, which will pair your mobile phone to the device’s Wi-Fi hotspot to ensure a connection.
- Page 20 The device will commence the pairing process and connect to the app. Ensure your Wi-Fi router, mobile phone, and the SmarterHome™ device are kept close until connection is complete. After successfully being added, you will have the option to rename the device and assign it to a location.
-
Page 21: Google Home Control
Note: You will need to have set up a Google Home account prior to linking your Kogan SmarterHome™ device. Adding ‘SmarterHome’ to the Google Home app From the home page of the Google Home app, select the ‘+’ icon (top left corner, see arrow in the below screenshot) to access the ‘Add and manage’... - Page 22 Select the search bar and type ‘Smarter Home’ to locate the Kogan SmarterHome™ service. From here, you will be prompted to sign into your SmarterHome™ account using either your email or mobile phone number, depending on which method you used to register your account.
- Page 23 Tap on any of the devices to view a list of available commands. Note: Please note that Google Home can only control the base/core functions of any compatible SmarterHome™ devices. To make full use of this product’s smart functionality, please use the Kogan SmarterHome™ app.
-
Page 24: Amazon Alexa Control
AMAZON ALEXA CONTROL Note: You will need to have set up an Alexa account prior to linking your Kogan SmarterHome™ device. Adding ‘SmarterHome’ to the Alexa app From the home page of the Alexa app, select the ‘ ’ icon in the bottom-right and select ‘Skills &... - Page 25 Tap ‘Enable to Use’ to add the Kogan SmarterHome™ skill to Alexa. From here, you will be prompted to sign into your SmarterHome™ account using either your email or mobile phone number, depending on which method you used to register your account.
- Page 26 Once connected, the app will perform a search and display the devices linked to your SmarterHome™ account. When your devices have successfully connected to the Alexa app, you will be able to control your Kogan SmarterHome™ devices via Alexa’s voice commands.
-
Page 27: Operation
OPERATION Powering ON/OFF • Press and hold the power button for 3 seconds, the indicators will illuminate and the vacuum will turn on and enter standby. • Press and hold the power button for 3 seconds while in standby, the indicator will turn off and the vacuum with shut down. - Page 28 Pausing Cleaning During cleaning pressing either the power or home button will pause the vacuum. • Pressing the power button while paused will resume cleaning. • Pressing the home button while paused will send the vacuum back to the auto-empty dock.
- Page 29 Spot Cleaning Spot cleaning focuses on specific areas to efficiently clean up local messes or spills. • Using the SmarterHome app, tap “Pin N Go”, then you can specify the desired location on the map. The vacuum will automatically head towards that point and clean a 1.5 x 1.5m area.
- Page 30 User-Defined Area Cleaning The vacuum features a User-Defined Area Cleaning feature, allowing you to define and specific areas or zones within your living space for targeted cleaning. This feature enables you to have precise control over the cleaning process and focus on specific areas that require extra attention.
- Page 31 Scheduled Cleaning Scheduled cleaning can be set up using the SmaterHome app. • From the settings menu, tap “Timer”, then you can setup the times you wish the vacuum to automatically clean. The vacuum will start cleaning automatically at the appointed time and return to the charging base after cleaning. DND (do not disturb) Mode When activated, DND mode ensures that the vacuum does not start cleaning or make any noise during specific periods or when...
- Page 32 Suction Power The vacuum features five suction power levels (closed, ECO, standard, strong and Max). This can be adjusted through the SmaterHomeTM app. • Tap “cleaning preference” and select one of the power levels. Water Flow The vacuum features four water volume levels (closed, low, middle and high).
-
Page 33: Cleaning & Care
CLEANING & CARE Rolling Brush The rolling brush should be cleaned once a week. Turn over the vacuum and press the release tab on the Rolling brush cover to remove out the Rolling brush. Remove any dust, hair and debris from the rolling brush using the cleaning brushes. - Page 34 Side Brushes The side brushes should be cleaned once a week. Turn over the vacuum and pull out the side brushes vertically. Use the cleaning brush to clear any dust, hair and debris, then reattach the side brushes. Press and reattach the left and right side brush (L, R) against the corresponding letters on the bottom of the vacuum.
- Page 35 Dustbin /Water Tank The dustbin should be cleaned once a week. Press the dust box release button and pull dustbin away from the vacuum. Open the cover on the dustbin and empty ton contents into a rubbish bin.
- Page 36 Cleaning the Filters The filters should be cleaned once a week. Open the dustbin cover, remove the filter cover, HEPA filter and filter sponge. Wash the filter cover, sponge and HEPA with water. Shake off any excess water and allow the filter cover, sponge and HEPA filter to air dry for at least 24 hours before resembling.
- Page 37 Clean the mopping cloth with water. Empty the water tank and wipe it dry using a soft cloth. Allow the mopping cloth to air dry for at least 24 hours before resembling. Sensors Clean once a month. Gently wipe the cliff sensor, charging contacts and wall sensor with a soft dry cloth. Cliff sensor Charging contacts Wall sensor...
- Page 38 Gently wipe the Laser radar, radar anti-collision, anti-collision sensor and infrared sensor with a soft dry cloth. Laser radar Radar anti- collision sensor Anti-collision sensor Infrared sensor Auto-empty Dock Clean once a month Gently wipe the charging contacts and infrared sensor on the auto-empty dock with a soft dry cloth.
- Page 39 Changing the Dust Bag 1. Open the auto-empty 2. Pull up the handle on 3. Remove the dust bag from the auto-empty dock cover. the dust bag. dock. 4. Discard the used dust 5. Insert the new dust bag 6. Close the cover of the into the auto-empty auto-empty dock, then dock and ensure that...
- Page 40 Firmware updates Check the app for any firmware updates. The battery capacity shall not be less than 50% when updating. It is recommended to place the device against the charging contacts during any update. Storage Store the vacuum in a cool, dry place. If the vacuum will not be used for an extended period, ensure to charge it fully at least every three months.
-
Page 41: Specifications
SPECIFICATIONS Vacuum Size 325x325x76mm Weight 3.0kg Battery 2600mAh Li-ion Rated voltage 14.4V Rated power Auto-empty Dock Size 287x248x330mm Weight 4.35kg Vacuum suction value of dust collector fan ≥ 25KPa Input voltage AC220V Dust bag capacity 3.5L Fan power 1050W... -
Page 42: Troubleshooting
TROUBLESHOOTING Problem Reason/Solution • The battery level is too low. Place the vacuum against the charging contacts of the auto-empty dock. The vacuum will then begin charging and turn on. The vacuum is not • The ambient temperature is below 0°C or above 40°C. turning on. - Page 43 • The Wi-Fi connection is abnormal. Reset the The vacuum cannot be Wi-Fi settings, ensure you have the latest version of the connected to the Kogan SmarterHome™ app™, and try to connect to the Kogan SmarterHome™ Wi-Fi network again. app.
- Page 44 Disconnect the power cord and reconnect it. If problem persists, contact help.Kogan.com for Error 21: Collecting fan motor error support. Check whether the dust bag has been Error 22: The dust bag is not installed...
- Page 45 Content and Name of Hazardous Substances Part Name Hazardous Plastic Circuit Power Metal Substance Battery Adapter casing board line part ○ Χ Χ Χ ○ Χ Lead (Pb) ○ ○ ○ ○ ○ ○ Mercury (Hg) ○ ○ ○ ○ ○...
-
Page 46: Notes
NOTES... - Page 48 Need more information? We hope that this user guide has given you the assistance needed for a simple set-up. For the most up-to-date guide for your product, as well as any additional assistance you may require, head online to help.kogan.com...