Set Date & Time Format; Displayed Information; Smart Zoom; Smart Zoom Switch - Pioneer AVIC-S2 Software Manual

Note: the coordinate display mode is independent from the coordinate input in Find
menu. You can use all three formats freely on the coordinate input screen.
5.6.1.3 Set Date & Time Format
You can set the date and time format displayed by AVIC-S2. Various international
formats are available.

5.6.2 Displayed information

There are three route data fields on the left of the Cockpit screen.
Their content is fixed in Cruise mode (when there is no active route), but for
Navigation mode you can change their content on this screen. The available values
are listed here: Page 32.

5.6.3 Smart Zoom

Smart zoom is a lot more than just a usual automatic zoom.
While navigating a route: when approaching a turn, it will zoom in and raise the
view angle to let you easily recognize your maneuver at the next junction. If the next
turn is at a distance, it will zoom out and lower the view angle to be flat in order to let
you see the road in front of you, or it can even switch to an Overview mode to let you
follow your position on the map.
While cruising: if there is no active route and you are just driving, Smart Zoom will
zoom in if you drive slowly and zoom out when you drive at high speed.
These automatic features can be set up on this screen.

5.6.3.1 Smart Zoom switch

Use this switch to turn Smart Zoom on or off.
58