Setup Instructions; Product Specifications - Intex ECO15230-1 Manual

(261IO) Sand Filter Pump & Saltwater System with Electrocatalysis Oxidation (14" & 16") ENGLISH 7.5" X 10.3" PANTONE 295U 05/25/2018

PRODUCT SPECIFICATIONS

The sand filter removes suspended particles and sanitize your pool. Pool chemistry is a
specialized area and you should consult your local pool service specialist for details.
Model:
Wattage:
Ideal Salt Level:
Maximum Sanitizer Output/hour: 11 grams/hour
Secondary Cell Output Current:
Maximum working pressure:
Effective filtering area:
Pump flow rate (at pump outlet): 10.0 m
Recommended filtering
media quantity:
Recommended filtering
media (Not included):
Limited Warranty:
TOOLS REQUIRED: One (1) Phillips screwdriver
Pump location and mounting:
• The system must be installed on a solid level and vibration-free base.
• Provide a location protected from the weather, moisture,
flooding and freezing temperature.
• Provide adequate access, space and lighting for routine
maintenance.
• Pump motor requires free circulation of air for cooling.
Do not install the pump in a damp or non-ventilated location.
A team of 2 or more people is recommended for setting up this product.
The appliance is intended only for household use.
Motor pre-filtering assembly setup:
1. Remove the sand filter and its accessories from the
packaging carefully and inspect for any visible damage.
2. In a counter-clockwise motion unscrew the leaf trap cover (14)
from the pre-filter housing. Take out the basket (16) and filter
housing nut (17) (see drawing 10).
3. Connect the pre-filter housing to the motor water inlet.
Note: Align the connector in the pre-filter housing with the
water inlet on the motor (see drawing 11).
SAVE THESE INSTRUCTIONS
ECO20220-1/ECO20230-1
650 W
3000 ppm (parts per million)
800mA
2 bar (30 psi)
2 2
0.13 m (1.44 ft )
3
/h (2650 GPH)
No. 20 silica sand 45 Kg
(100 Lbs) or glass sand 32 Kg
(70 Lbs).
No. 20 silica sand or glass sand. Particle size range 0.45 to 0.85
mm (0.018 to 0.033 inches). Uniformity Coefficient less than 1.75.
see "Limited Warranty"

SETUP INSTRUCTIONS

English
ECO15220-1/ECO15230-1
350 W
3000 ppm
7 grams/hour
500mA
2 bar (30 psi)
2 2
0.1 m (1.1 ft )
3
6.0 m /h (1600 GPH)
No. 20 silica sand 25 Kg
(55 Lbs) or glass sand 18 Kg
(40 Lbs).
14
40
16
17
Page 8
261A
10
11