Sennheiser evolution wireless G4 em 300-500 Instruction Manual page 6

Connecting/disconnecting the EM 300-500 G4 to/
from the power supply system
Only use the supplied power supply unit. It is designed for your receiver
and ensures safe operation.
To connect the EM 300-500 G4 to the power supply system:
Insert the plug of the power supply unit into the DC IN socket of the re-
▷
ceiver.
Pass the cable of the power supply unit through the cable grip.
▷
▷ Slide the supplied country adapter onto the power supply unit.
Plug the power supply unit into the wall socket.
▷
To completely disconnect the EM 300-500 G4 from the power supply sys-
tem:
▷ Unplug the power supply unit from the wall socket.
Unplug the power supply unit from the DC IN socket of the receiver.
▷
Installing the EM 300-500 G4
26