Sennheiser evolution wireless G4 em 300-500 Instruction Manual page 30

Table of Contents

▷

Select an unused frequency for one of the connected receiver on the

master receiver.

The frequency selected on the master receiver will also be shown on

the display panel of the connected receivers.

Press the jog dial (SET) on the particular receiver to save your selected

▷

frequency and synchronize it with the corresponding transmitter at a

later point (see "Synchronizing devices").

▷

Press the SYNC button to synchronize the selected frequency with the

transmitter immediately.

Use this procedure to assign an unused frequency to all connected re-

▷

ceivers, one after another.

For the last step, assign a frequency to the master receiver.

▷

This completes the multi-channel frequency setup.

Using the EM 300-500 G4

Table of Contents