Sennheiser evolution wireless G4 em 300-500 Instruction Manual page 11

Mounting a single receiver in a rack
To mount the receiver in a rack, you will need the GA 3 rack mounting kit
(optional accessory).
To fasten the mounting angle of the GA 3 rack mounting kit:
Unscrew and remove the two recessed head screws (M4x8) on each
▷
side of the receiver.
Secure both of the the mounting angles to the sides of the receiver us-
▷
ing the previously removed recessed head screws.
▷ Secure the blanking plate to one of the mounting angles using two re-
cessed head screws (M6x10).
▷ Attach the AM 2 antenna front mounting set (optional accessory) and
mount the rod antennas on the blanking plate (right diagram).
▷ Slide the receiver with the mounted blanking plate into the 19" rack.
Secure the mounting angle and the blanking plate to the 19" rack.
▷
▷ Align the mounted antennas in a V-shape.
Installing the EM 300-500 G4
31