Controls - Subaru Outback 2019 Quick Manual

Controls

Light Controls
Push forward to change from low
beam to high beam. Pull the lever
back to center to return to low beam.
Push slightly up
for lane change
or fully up for
right turn signal.
Push slightly down
for lane change or
fully down for left
turn signal.
AUTO: The vehicle's lights are
automatically on or off, depending
on the level of outside light.
While the light switch is on, rotate the dial downward to dim the instrument panel illumination.
Rotate the dial upward to make the illumination brighter. When the dial is fully rotated upward
(dots aligned), the instrument panel illumination stays at full brightness.
14
Turns on headlights, instrument
panel illumination, parking lights,
tail lights and license plate lights.
Turns on instrument panel
lights, tail lights, parking lights
and license plate lights.
Rotate to turn
on fog lights
(if equipped).