Table of Contents
Advertisement
IMPORTANT ASSEMBLY INFORMATION
Tools required for assembling the equipment: two adjustable wrenches and allen
wrenches.
NOTE: It is strongly recommended that this equipment is assembled by two or more
people to avoid possible injury.
Ensure Carriage Bolts are inserted through the SQUARE holes on components that need to
be assembled. Attach washer only to end of the Carriage Bolt.
Use Allen Bolts or Hex Bolts inserted through the ROUND hole on components that need to
be assembled.
Always wait until all bolts are assembled onto the equipment before tightening the bolts. Do not
fasten each bolt right after it is installed
Fasten Nuts and Bolts
Seat Support (Part# 17) Assembly
The pivot on Seat Support needs to face
when assembling the Seat Support.
©IMPEX INC.
Securely tighten all Nuts and Bolts after all
components have been assembled in current and
previous steps.
NOTE: Do not over tighten any component with
pivotal function.
Make sure all pivotal components are able to move
freely.
Do not tighten all Nuts and Bolts in this step.
6
upward
Advertisement
Table of Contents
