Table of Contents
Advertisement
Basic Operation of XM Tuner
Selecting the Channel by Channel Number
When Channel Number Select mode is selected, you can select a desired Channel by
Channel Number. (Refer to page 23.)
Initially, Channel Number Select mode is selected.
• Select a desired channel with the 2/3 button.
Note:
• Channels that cannot currently be selected are skipped, and the next Channel is selected.
• If you continue pressing the button for longer than 0.5 seconds, you can increase/decrease
Channel Number by 10 to enable you to quickly jump to your desired Channel.
• You can also select a Channel from a desired Channel Category. (Refer to page 23.)
• Display changes as follows when you switch Channels or operate in other ways.
Channel Number = Channel Name = Selected Display *
* For details, refer to "Switching the Display".
• It may take a few seconds before you can hear anything wile this product acquires and processes
the satellite signal when you switch power ON, change the Source to XM tuner, or select a
Channel.
Channel Number
Preset Tuning
• You can memorize Channels in buttons 1 through 6 for easy, one-touch
Channel recall.
Preset Channel recall
Channel preset memory
Note:
• Memorize a Channel when you hear sound from that Channel.
• Memory/recall are for broadcasts. If you recall a memorized broadcast that has been moved to
another Channel, the Channel to which the broadcast was moved is selected.
• Up to 18 XM channels (6 in XM1, XM2 and XM3) can be stored in memory.
• When Channel Number Select mode is selected, you can also use the 5 or ∞ buttons to recall
broadcast stations memorized in buttons 1 through 6.
• If a Channel you have recalled cannot be selected, a message is displayed for 2 seconds and the
unit returns to the operating status before the Channel was recalled.
Preset Number Indicator
2 seconds or less
2 seconds or more
Band
XM1 = XM2 = XM3
10
Advertisement
Table of Contents
