Table of Contents
Advertisement
Symbols and their meaning
Laser radiation
LASER RADIATION
DO NOT STARE INTO BEAM
CLASS 2 LASER PRODUCT
IEC 60825-1:2014
Do not look directly into the beam
<1mW, 650 nm
Laser class 2
Keep hands away from the cutting area
while the power tool is running. Con-
tact with the saw blade can lead to injur-
ies.
Wear a dust mask.
Wear safety goggles.
Wear hearing protection. Exposure to
noise can cause hearing loss.
Danger area! Keep hands, fingers and
arms away from this area.
When transporting the power tool, hold it
only at the locations indicated (recessed
handles) or by the transport handle.
When sawing bevel angles, the adjustable
fences must be pulled outwards or re-
moved completely.
3 601 M51 0..
Observe the dimensions of the saw
blade. The hole diameter must match the
tool spindle without play. If it is neces-
sary to use reducers, ensure that the di-
mensions of the reducer are suitable for
the base blade thickness and the saw
3 601 M51 0B.
blade hole diameter, as well as the tool
spindle diameter. Wherever possible, use
25,4
the reducers provided with the saw
blade.
The saw blade diameter must match the
information specified on the symbol.
Bosch Power Tools
Product Description and
Specifications
Read all the safety and general instructions.
Failure to observe the safety and general in-
structions may result in electric shock, fire
and/or serious injury.
Please observe the illustrations at the beginning of this oper-
ating manual.
Intended Use
The power tool is intended as a stationary machine for mak-
ing straight cuts in wood with and against the grain. Mitre
angles of –48° to +48° as well as bevel angles of 47° (left-
hand side) to 47° (right-hand side) are possible.
The power tool is designed with sufficient capacity for saw-
ing hardwood and softwood as well as chipboard and fibre-
board.
When using appropriate saw blades, sawing aluminium pro-
files and plastic is also possible.
Product Features
The numbering of the product features refers to the diagram
of the power tool on the graphics page.
(1)
Locking screw for slide device
(2)
Slide device
(3)
Transport handle
(4)
Protective guard
(5)
Lock-off function for on/off switch
(6)
On/off switch
(7)
Handle
(8)
Laser protection cap
(9)
Laser beam outlet aperture
(10)
Retracting blade guard
(11)
Guide roller
(12)
Saw table
(13)
Mounting holes
(14)
Insert plate
(15)
Locking clamp
(16)
Locking knob for various mitre angles
(17)
Mitre pre-setting lever
(18)
Tilt protector
(19)
Laser warning label
(20)
Detents for standard mitre angles
(21)
Scale for mitre angles
(22)
Clamping screw for saw table extension
(23)
Saw table extension
(24)
Workpiece support (flexibly pluggable)
(25)
Fixed fence
(26)
Adjustable fence
English | 17
1 609 92A 7BL | (02.12.2022)
Advertisement
Table of Contents
