Table of Contents
Advertisement
Wheels and Axle
1. Locate wheels, spacers and axle in
packaging. Remove 2 push caps from
hardware packet.
2. Stand axle upright placing one end on the
floor. Gently tap one push cap onto end
of axle.
3. Slide one wheel and spacer onto axle then
carefully slide axle through heater body as
shown in Figure 5.
4. Slide second spacer and wheel onto axle
from opposite side of heater.
5. Have another person secure wheel and
axle from other side of heater while gently
tapping second push cap onto end of
axle.
Top
1. Remove 4 brackets, (8) 1/2" black screws
and (8) 3/8" screws from hardware
packet.
2. Lay top upside down on a clean surface.
Attach 4 brackets to top with 1/2" black
screws.
Bracket
Slots
10
aSSeMBLy
Continued
Figure 5 - Installing Axle, Spacers and
3. Turn top over and carefully place over
4. Attach brackets to heater with 3/8" screws.
Figure 6 - Attaching Top
www.desatech.com
Heater
Front
Spacer
Push Cap
Wheels
heater, positioning brackets through slots
in heater front and rear panels.
Top
Bracket
Axle
Wheel
Bracket
Screws
120193-01C
Advertisement
Table of Contents
