Contents Getting Started ......................3 Package Contents ....................3 Installing the Monitor Stand ................... 4 Adjusting the Monitor ..................... 5 Monitor Overview ....................6 Connecting the Monitor to PC ................8 OSD Setup ........................9 Navi Key ........................9 OSD Menus........................10 Professional ......................
This chapter provides you with the information on hardware setup procedures. While connecting devices, be careful in holding the devices and use a grounded wrist strap to avoid static electricity. Package Contents Monitor Modern MD271UL Documentation Quick Start Guide Stand with Screw(s) Accessories...
Installing the Monitor Stand 1. Leave the monitor in its protective foam packaging. Align the stand to the monitor groove. 2. Push the stand towards the monitor groove until it locks in place. 3. Make sure the stand assembly is properly installed before setting the monitor upright.
Adjusting the Monitor This monitor is designed to maximize your viewing comfort with its adjustment capabilities. ⚠ Important Avoid touching the display panel when adjusting the monitor. ∙ -5° 20° Getting Started...
Page 7
Navi Key Power Button Power LED Lit in white after the monitor is turned on. If no signal input, the LED will turn into orange. Lit in orange when the monitor is in Stand-by mode. HDMI™ Connector Supports 4K@60Hz as specified in HDMI™ 2.0b. DisplayPort Supports 4K@60Hz as specified in DisplayPort 1.2a.
Connecting the Monitor to PC 1. Turn off your computer. 2. Connect the video cable from the monitor to your computer. 3. Assemble the external power supply & power cord. (Figure A) 4. Connect the external power supply to the monitor power jack. (Figure B) 5.
OSD Setup This chapter provides you with essential information on OSD Setup. ⚠ Important All information is subject to change without prior notice. Navi Key The monitor comes with a Navi Key, a multi-directional control that helps navigate the On-Screen Display (OSD) menu. OSD Key Hot Key (When OSD is OFF) OSD Setup (When OSD is ON)
OSD Menus Professional 1st Level Menu 2nd/3rd Level Menu Description Mode ∙ Use Up or Down Button to select and preview mode effects. User ∙ Press the E Button to confirm and apply your mode type. sRGB Anti-Blue Movie Office Black-White Response Time Normal...
Page 11
1st Level Menu 2nd/3rd Level Menu Description Refresh Rate Location Left Top ∙ Location is adjustable in OSD Menu. Press the E Button to Right Top confirm and apply your Refresh Rate Location. Left Bottom ∙ This monitor follows and works Right Bottom at the Operating System’s preset Screen Refresh Rate.
1st Level Menu 2nd/3rd Level Menu Description Screen Size Auto ∙ Users can adjust Screen Size in any mode, any resolution and any screen refresh rate. 16:9 Adaptive-Sync ∙ Adaptive-Sync prevents screen tearing. Image 1st Level Menu 2nd/3rd Level Menu Description Brightness 0-100...
1st Level Menu 2nd/3rd Level Menu Description HDCR ∙ HDCR enhances image quality by increasing the contrast of images. ∙ Activating HDCR will affect: Affected Function Function Status » Brightness Unable to select Color Cool ∙ Use Up or Down Button to select Temperature and preview mode effects.
Navi Key 1st Level Menu 2nd Level Menu Description Enter ∙ All Navi Key items can be adjusted via OSD Menus. Left Brightness Right Mode Alarm Clock Input Source Refresh Rate Info. On Screen Setting 1st Level Menu 2nd Level Menu Description Language 繁體中文...
Page 15
1st Level Menu 2nd Level Menu Description OSD Time Out 5~30s ∙ Users can adjust OSD Time Out in any mode. Power Button ∙ When set to OFF, users can press the power button to turn off the monitor. Standby ∙...
Preset Display Modes ⚠ Important All information is subject to change without prior notice. Modern MD271UL Standard Resolution HDMI™ DP/ Type-C 1920x1080 @60Hz 2560x1440 @60Hz 3840x2160 @60Hz 720P 1080P 2160P @50Hz @60Hz Preset Display Modes...
Troubleshooting The power LED is off. • Press the monitor power button again. • Check if the monitor power cable is properly connected. No image. • Check if the computer graphics card is properly installed. • Check if the computer and monitor are connected to electrical outlets and are turned on.
∙ Place the power cord in a way that people are unlikely to step on it. Do not place anything on the power cord. ∙ If this device comes with an adapter, use only the MSI provided AC adapter approved for use with this device.
Page 21
California, USA: The button cell battery may contain perchlorate material and requires special handling when recycled or disposed of in California. For further information please visit: https://dtsc.ca.gov/perchlorate/ Environment ∙ To reduce the possibility of heat-related injuries or of overheating the device, do not place the device on a soft, unsteady surface or obstruct its air ventilators.
TÜV Rheinland Certification TÜV Rheinland Low Blue Light Certification Blue light has been shown to cause eye fatigue and discomfort. MSI now offers monitors with TÜV Rheinland Low Blue Light certification to ensure users’ eye comfort and well-being. Please follow the instructions below to reduce the symptoms from extended exposure to the screen and blue light.
1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation. MSI Computer Corp. 901 Canada Court, City of Industry, CA 91748, USA (626) 913-0828 www.msi.com...
Page 24
Vietnam RoHS As from December 1, 2012, all products manufactured by MSI comply with Circular 30/2011/TT-BCT temporarily regulating the permitted limits for a number of hazardous substances in electronic and electric products.