VTech CTM-A2510-USB User Manual page 45

Installation
Analog cordless 1-line/2-line accessory Petite - CTM-A241P/CTM-A242P
Installation option - converting from desktop to wall mount position
To mount the phone on the wall:
1. Set aside the handset. On the phone cradle, place a coin in the slit of the wall mount clip and rotate a half turn (180 degrees). It
locks into place with the protruding edge pointing towards the upper edge of the phone. This protruding edge holds the corded
handset when the phone is mounted on the wall.
2. Press the large tab on the mounting bracket to remove it from the upper groove on the phone.
3. Turn the mounting bracket upside down. Insert the small tabs on the mounting bracket into the upper slots on the phone. Then
press the large tab on the mounting bracket and firmly push it into the lower groove on the base.
4. Mount the phone on the wall by aligning the eyelets with the mounting studs of the wall plate. Then slide the phone down on both
mounting studs until it locks into place. Place the handset on the phone cradle.
41
Protruding edge