Pico Macom PICO-TECH Specifications

PICOTECH_fab07.qxd 3/30/07
Descriptions
PICO-TECH
Signal Analysis Meter
Full-channel operation 46-870 MHz
Frequency Range (Channels 2-134)
Preset and user modifiable CATV
channel plan enables quick,
simple operation
Single frequency or channel
selection provides compatibility
with channel, data and other
narrow bandwidth carriers
Full-channel scan provides
"snapshot" of over 100 video
and audio carrier levels
Two-channel measurement feature
provides low/high channel reference,
allowing amplifier adjustment
without the need for changing
meter settings
Large, easy-to-read backlit LCD
display provides quick-glance
signal reference even in dimly lit
work environments.
AC voltage readings and compati-
bility allow measurements through
input connector, enabling signal
and voltage measurements when
voltage is presented in tested
signal without costly adapters
Cost-saving eight-hour rechargeable
batteries; meter's automatic power
shut-off feature extends time
between recharges
6260 Sequence Drive, San Diego, CA 92121
Ph: 858-546-5050 Fax: 858-546-5051
Rev. 03/07
4:59 PM Page 1
PICO-TECH
Signal Analysis Meter
Pico Macom's PICO-TECH is a feature-rich handheld signal level meter used in CATV
system signal measurement and adjustment. The user can choose the pre-programmed
CATV plan or user-customized plan for easier channel selection and scanning. Channel
measurement of signals is provided as video, audio, and V/A difference carrier level to provide
maximum flexibility. The frequency tuning selection is also provided for measurement and
adjustment in headend and distribution networks that employ narrow digital signals, or in
non-standard frequency applications. The two-channel measurement mode allows level
display of two channels simultaneously, simplifying tilt balancing of amplifiers. In the channel
scan mode, the PICO-TECH provides a numeric display of over 100 channels for full spectrum
level analysis. The meter's functions include not only signal measurement when AC voltage
is present under test but also (when selected) voltage-level display, eliminating the need to
switch test equipment when there is voltage on the line. The meter displays instantaneous
peak signal levels when testing digital carrier levels. The LCD screen displays signal level
as an easy-to-read digital numeric readout. This backlit display provides screen illumination
in dimly lit workspaces, allowing behind-rack and night meter operation. The feature-rich
PICO-TECH enables measurement of single or multiple channels, single frequency, full
band scan and AC voltage measurement for complete field flexibility. It is packaged in a
protective case and with a charge adapter.