Pico Pro Manual 06.qxd 4/10/06 3:20 PM Page 1 PICO-PRO Signal Analysis Meter User Manual Pico Macom, Inc. Manual 355 Parkside Drive, San Fernando, CA 91340 USA Rev. 03/06 Ph: 818-493-4300 www.picomacom.com Fax: 818-493-4433...
PICO-PRO Foreword Thank you for selecting Pico Macom’s Pico-Pro Signal Analysis Meter. Please read this manual carefully before initial operation. Inspect the shipping container for damage. If the shipping container or cushioning material is damaged, keep it until you have verified that the contents are complete and you have tested the instrument mechanically and electrically.
PICO-PRO 1. ABOUT THE INSTRUMENT The PICO-PRO Signal Analysis Meter is specially designed and manufactured for CATV system installation and testing. It’s a portable instrument, easy to carry with many functions. This instrument can test CATV signal level both at channel and frequency mode. At SCAN mode, it can scan all channels and store signal levels.
At SETUP mode, use numeric keys to input English letter, space, etc. 3:20 PM Page 3 Pico-Pro User Manual PICO-PRO Press these keys to enter the channel S / . number and frequency value. To input frequency use decimal points to the nearest thousands.
Pico Pro Manual 06.qxd 4/10/06 Pico-Pro User Manual PICO-PRO 3.2 HOW TO SET Press “2ndF” then “7”. 2ndF LCD display as follows: Press key to select menu (in three screens) then press key “ENT” to enter selected SET mode. Press Key “CLR” to escape to testing mode.
“SCAN AUDIO” is highlighted, press “ENT”; the LCD will display: 3:20 PM Page 5 Pico-Pro User Manual PICO-PRO Pressing “F2” will scan Audio and Video carrier simultaneously at Channel Scan mode. Pressing “F3” will only scan Video carrier at Channel Scan mode.
Pico Pro Manual 06.qxd 4/10/06 Pico-Pro User Manual PICO-PRO 3.2.10 Channel Sort The default “CHANNEL SORT” is sorted by frequency. Press key arrow head points to “CHANNEL SORT”, press key “ENT” to confirm; LCD will display: Select the desired option by pressing 3.2.11 Channel Edit...
Press key pad to easily input channel number and/or frequency to the nearest thousands. 3:20 PM Page 7 Pico-Pro User Manual PICO-PRO 3.3.2 Scan Channels Press “SCAN” to enter Channel SCAN mode. The LCD displays: Press key to change reference level display at 10dB/Division.
Pico Pro Manual 06.qxd 4/10/06 Pico-Pro User Manual PICO-PRO 3.3.4 Voltage Test Press “2ndF” then “VOLT/6” and the instru- ment will enter voltage testing mode. It will test the built-in battery voltage and the trunk voltage. The LCD displays: 3.3.5 C/N Test (The result is only for reference, not accuracy.)
Page 16
Pico Pro Manual 06.qxd 4/10/06 3:21 PM Page 14 PICO MACOM, INC. 355 Parkside Drive San Fernando, CA 91340 USA Ph: 800-421-6511 www.picomacom.com...