Pico Macom PICO-PRO Specifications

Installation Tools &
Instrumentation
Full-channel operation
5-870 MHz Frequency Range
(Channels T7-T13, 2-135)
4-keypad channel plans
(TV, CATV/STD, CATV/HRC,
SUB/VHF) enable quick
switching between sources
Single keypad frequency or
channel selection provides
compatibility with channel,
data, and other narrow
bandwidth carriers
Full spectrum-analyzer scan
provides display of up to 100
channels simultaneously
Carrier-to-noise testing
provides accurate testing of
system performance anywhere
in the headend or distribution
system
Large easy-to-read backlit
Graphic LCD display provides
quick-glance signal reference
even in dimly lit work
environments
AC/DC voltage readings and
compatibility allow measure-
ments through input connec-
tor, enabling signal and voltage
measurements when voltage is
present in tested signal with-
out costly adapters
8-Hour rechargeable NiMH
batteries provide cost savings
Automatic power shut-off
feature extends time between
recharges
Bright orange high impact
plastic housing and soft
leatherette-vinyl protective
case with belt clip included
www.picomacom.com
PICO-PRO
PICO-PRO
Signal Analysis Meter
Pico Macom's PICO-PRO is a full-featured handheld signal performance meter pro-
viding a complete signal test system in easy-to-carry protective case. The PICO-PRO
allows choice of 4 pre-programmed user-selectable band plans accessed via keypad
entry for easy measurement of broadcast, CATV, CATV/HRC, and SUB/VHF channels.
Direct-entry channel or frequency tuning selections provide maximum flexibility in
headends and distribution networks that employ narrow digital signals, or non-standard
frequency applications. The meter displays instantaneous digital signal levels when
testing digital carrier levels. The large LCD screen displays signal level as a bar-graph
with digital numeric readout. This backlit display provides screen illumination in dimly lit
work-spaces, allowing behind rack and night meter operation. The PICO-PRO enables
testing of carrier-to-noise, multiple channels, and full, reduced, and single band scan
for complete testing flexibility. The meter's functions include not only signal measurement
when AC/DC voltage is present under test, but, when selected, voltage-level display.
355 Parkside Drive San Fernando, CA 91340
Ph: 818-493-4300 Toll Free: 800-421-6511 Fax: 818-493-4433
Signal Analysis Meter
E-3
Rev. 07/04