MSI 880GMA-E35 Manual page 18

MS-7641
Fan Power Connectors: CPuFan, SySFan
the fan power connectors support system cooling fan with +2V. When connect-
ing the wire to the connectors, always note that the red wire is the positive and
should be connected to the +2V; the black wire is Ground and should be con-
nected to Gnd. if the mainboard has a System Hardware monitor chipset on-
board, you must use a specially designed fan with speed sensor to take advantage
of the CPu fan control.
CPuFan SySFan
S/PdiF-out Connector: JSP
this connector is used to connect S/PdiF (Sony & Philips digital interconnect
Format) interface for digital audio transmission.
Front Panel Connectors: JFP, JFP2
these connectors are for electrical connection to the front panel switches and
Leds. the JFP is compliant with intel Front Panel i/o Connectivity design
®
Guide.
JFP2
JFP
7