Advertisement
button
1.
• Exits the OSD menu item.
• Displays the input selection bar when the monitor enters standby mode
or displays the "NO SIGNAL" message.
• This is a shortcut key. The default setting is Input Select .
• Toggles the Key Lock function between on and off with a long press for 5
seconds.
5-wa y button :
2.
Turn on the OSD menu. Enact the selected OSD menu item.
•
Increase/Decrease values or moves your selection up/down/
•
left/right.
Turns on the OSD menu. Enacts the selected OSD menu item.
3.
Close Button: Exit the OSD menu or move to the previous menu
4.
or Turns on the OSD menu.
GamePlus Button: This is a shortcut key. The default setting is
5.
GamePlus.
- Activate Crosshair, Timer, Stopwatch,FPS Counter, or Display
Alignment function.
- Move the
the function needed.
1-2
button up/down to select and press
For more information on GamePlus function, refer to
•
to confirm
page 1-4
Chapter 1: Product introduction
.
Advertisement
