D-Link DIR-825 User Manual page 216

DIR-825 AC1200 Wave 2 MU-MIMO Wi-Fi Gigabit Router
with 3G/LTE Support and USB Port
User Manual
In the opened window, you can specify the following parameters:
Parameter
Enable rule
Action
MAC address
Hostname
After specifying the needed parameters, click the SAVE button.
To edit a rule, select the relevant line in the table. In the opened window, change the needed
parameters and click the SAVE button.
To remove a rule, select the checkbox located to the left of the relevant line of the table and click
the DELETE button (
Move the switch to the right to enable the rule.
Move the switch to the left to disable the rule.
Select an action for the rule.
Deny: Blocks access to the Internet for the device with the
•
specified MAC address even if the default mode allows
access for all devices.
Allow: Allows access to the router's network and to the
•
Internet for the device with the specified MAC address even
if the default mode denies access for all devices.
The MAC address of a device from the router's LAN. You can enter
the MAC address of a device connected to the router's LAN at the
moment. To do this, select the relevant device from the drop-down
list (the field will be filled in automatically).
The name of the device for easier identification (optional). You can
specify any name.
). Also you can remove a rule in the editing window.
Page 216 of 249
Configuring via Web-based Interface
Description