Client - D-Link DIR-825 User Manual

DIR-825 AC1200 Wave 2 MU-MIMO Wi-Fi Gigabit Router
with 3G/LTE Support and USB Port
User Manual

Client

On the Wi-Fi / Client page, you can configure the router as a client to connect to a wireless access
point or to a WISP.
To configure the router as a client, move the Enable switch to the right. Upon that the following
fields are displayed on the page:
Parameter
Broadcast wireless
network 2.4 GHz /
Broadcast wireless
network 5 GHz
Connecting to network
Figure 107. The page for configuring the client mode.
If the switch is moved to the left, devices cannot connect to the
router's WLAN. Upon that the router can connect to another access
point as a wireless client.
A method for connecting to another access point.
Page 139 of 249
Configuring via Web-based Interface
Description