Note:
Fan style may vary.
x9
Blade Screw
x9
bag
Blade Washer
Ceiling Bracket
Downrod
Installing the Canopy
Lift the canopy into place so that
the screw holes are aligned.
Installing the Blades:
Slide blade into blade assembly slot and align screw holes of the blade with the
screw holes in the blade assembly. Attach each blade to blade assembly using the
blade screws and washers, found in the
Repeat x3
Hanging Fan
Wiring
Insert the two canopy screws
found in the
hardware bag.
hardware bag.
Canopy
Blades
x2
Canopy Screw
bag
NOTICE
If screw holes do not align
properly then rotate the canopy
180 degrees. Hanger ball shape
must match canopy opening for
correct canopy installation.
Control
Troubleshooting
1886
6