Fm Radio (On Station Only); Tuning To Radio Stations; Storing Preset Radio Stations; Autostore: Automatic Programming - Philips WACS57 User Manual

Tuning to radio stations

1
Check the set is switched on or to standby
(See Basic functions)
2
Press SOURCE once or more to select Radio
(on the remote control, press TUNER/AUX
once or more)
➜
Playback screen appears. Display shows:
Radio, radio station frequency and If
programmed, a preset number
3
Press and hold 3 or 4 until the frequency
in the display starts running
➜
The radio automatically tunes to a station of
sufficient reception. Display shows searching
during automatic tuning
➜
If a station is received in stereo,
shown
4
Repeat step 3 if necessary until you find the
desired radio station
●
To tune to a weak station, press 3 or 4
briefly and repeatedly until optimal reception is
found

FM radio (on Station only)

Storing preset radio stations

You can store up to 40 preset radio stations in
the memory.

Autostore: automatic programming

Autostore automatically starts programming
radio stations from preset 1. Available stations
are programmed in the order of radio
frequencies.
●
To select Autostore radio,
a. Press MENU
b. Use the navigation controls 3 or 4 and 2 to
select
➜
Display shows: Autostore Please wait...
➜
After all stations are stored, the first autostore
preset station will then automatically play
is

Manual programming

1
Tune to your desired radio station (see Tuning
to radio stations)
2
On the remote control, press Program to
store the station
➜
The station is stored in the 1st vacant preset
position. Display shows its preset number
3
Repeat steps 1-2 to store other stations
Helpful hints:
– If you store more than 40 stations, the new
station will replace the 1st preset station.
SMART EQ
SAME ARTIST
43