Firmware; Upgrading Firmware; Restoring Previous Firmware; Re-Establishing Wi-Fi Connection - Philips WACS57 User Manual

Firmware

Upgrading firmware

The supplied PC Installer CD contains Digital
Media Manager (DMM) software. It will help
you get the upgrades for WAC5 Center. For
details, see DMM's help file. Refer to the manual
Connect to your PC to learn how to install
DMM software.

Restoring previous firmware

After the Center's firmware is upgraded, you can
restore it to its previous version as desired.
1
In Center's HD mode, press and hold STOP •
MENU (or on remote control, press MENU)
2
Use the navigation controls 3 or 4 and 2 to
enter Settings menu
3
Press 3 or 4 and 2 to select Firmware
4
Press 3 or 4 and 2 to select Restore
firmware
5
Press 3 or 4 and 2 to select Yes

Re-establishing Wi-Fi connection

After upgrading or restoring the Center's
firmware, you need to re-establish the Wi-Fi
connection between Center and Stations.
On Center,
●
Select HD mode and then, enter Installation
Mode by:
a. Press and hold STOP • MENU (or on
remote control, press MENU)
b. Use the navigation controls 3 or 4 and 2 to
enter Station Mgnt menu
c. In Station Mgnt menu, use the navigation
controls 3 or 4 and 2 to select Add New
Station
➜
Searching for Stations starts
On the Stations,
●
Select AUX mode and enter Installation
Mode by:
a. Press MENU
b. Use the navigation controls 3 or 4 and 2 to
select Installation Mode
On Center,
●
Press STOPÇto exit Installation
Mode when Center has found all the stations
HD
39