Bluetooth Streaming - Boss Audio Systems elite BEHDIN98 User Manual

Single-din mp3/wma am/fm receiver
Table of Contents

Advertisement

To select a preset station
1.
Select a radio band.
2.
Press
briefly to select a preset station.
- The current preset number is displayed.
- If an FM radio station is broadcast with stereo, "ST" is displayed.
Radio Settings
You can access the radio menu to change settings for your radio.
1.
In radio source, hold down
2.
When a radio menu option is displayed, press
knob to change an option setting.
• AREA USA/ AREA EUR: Select America or Europe you are in to receive radio signal.
• LOCAL ON/ LOCAL OFF: Select "LOCAL ON" when most FM stations are strong enough (e.g. in urban
areas). Only the stations with strong signal will be received.
Select "LOCAL OFF" when most FM stations are weak (e.g. in the countrysides). Stations with both strong
and weak signals will be received.
• FM ST/ FM MONO: Select stereo or mono reception. When FM signal is weak, select mono to improve
sound quality (stereo will be lost).
• AUTO STORE: Press the function knob to search and store FM or AM radio stations.
3.
Press
to exit the settings.

Bluetooth Streaming

When you can stream music from your mobile device (e.g. a mobile phone) to the unit for the first time, you
must pair the unit with your mobile device through Bluetooth.
1.
Press
to select Bluetooth source.
- "BT AUDIO" is displayed briefly, then "NO DEVICE" is displayed. The
unit is now in pairing mode.
2.
On your mobile device, enable Bluetooth then select "Boss Audio ELITE BEHDIN98" to pair the unit with
your mobile device. If prompted for password, input "0000" on your mobile device.
- When the unit connects to your mobile phone, the
- The unit automatically connects the last paired device each time the two are powered on. To connect a
second Bluetooth device, you have to disconnect the currently connected device then repeat the steps
above to pair with a second device.
twice to enter radio setting menu.
/
- 9 -
briefly to select an option. Then rotate the function
icon flashes to indicate that the
icon turns to be steady from flashing.

Advertisement

Table of Contents
loading

Table of Contents