Samsung V32F390FE Series User Manual page 78

Other Information
Issues
The Anynet+ device does not
play.
The connected device is not
displayed.
Some functions and pictures shown in this manual are available on specific models only.
"
To keep your product in optimum condition, upgrade to the latest firmware on the Samsung web site by USB
"
(samsung.com → Support → Downloads).
Solutions and Explanations
You cannot use the play function when
Check whether or not the device supports Anynet+ functions.
Check whether or not the HDMI cable is properly connected.
Check whether Anynet+ (HDMI-CEC)
Search Anynet+ devices again.
Anynet+ requires an HDMI connection. Make sure the device is connected to your
product with an HDMI cable.
Some HDMI cables may not support Anynet+ functions.
If the connection is terminated because there has been a power failure or the HDMI
cable has been disconnected, please repeat the device scan.
English - 78
Setup is in progress.
is set to On. (System → Anynet+ (HDMI-CEC))