Table of Contents
Advertisement
Getting Started
Avoid installing the product in a
location that is unstable or exposed
to excessive vibration such as on
an unstable or slanted shelf.
●
●
Avoid installing the product in a
location exposed to direct sunlight
and installing the product near a
heat source such as a fireplace or
heater.
●
Bend the outdoor aerial cable
downwards at the location where
it comes in the house so that
rainwater does not flow in.
●
Caution
Do not let the product drop while
moving it.
●
When installing the product on a
console or shelf, make sure that
the front of the product does not
protrude out of the console or
shelf.
●
●
The product may fall and this
may result in damage to the
product or injury.
If you use the product in a
location exposed to excessive
vibrations, it may result in a
problem with the product or
fire.
This may shorten the product
life cycle or cause fire.
If rainwater enters the product,
it may result in electric shock
or fire.
This may result in a problem
with the product or injury.
Otherwise, this may cause the
product to fall off and result in
a malfunction or injury.
Make sure to use a cabinet or
shelf suitable to the size of the
product.
English - 6
Avoid installing the product in a
location exposed to dust, moisture
(sauna), oil, smoke or water (rain
drops) and installing it within a
vehicle.
●
This may result in electric
shock or fire.
Avoid installing the product where
children may reach it.
●
If a child touches the product,
the product may fall and this
may result in injury.
●
Since the front part is heavier,
install the product on a flat
and stable surface.
Install the aerial far away from any
high voltage cables.
●
If the aerial touches or falls
onto a high voltage cable, it
may result in electric shock or
fire.
Do not place the product face
down on the floor.
●
This may damage the panel of
the product.
When putting the product down,
handle it gently.
●
Otherwise, it may result in a
problem with the product or
injury.
Advertisement
Table of Contents
