Removing The Memory Module(S); Replacing The Memory Module(S) - Dell XPS L502X Service Manual
Hide thumbs
Also See for XPS L502X:
- Setup manual (112 pages) ,
- Service manual (110 pages) ,
- Service manual (56 pages)
Table of Contents
Advertisement
Back to Contents Page
Memory Module(s)
Dell™ XPS™ L502X Service Manual
Removing the Memory Module(s)
Replacing the Memory Module(s)
WARNING:
Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
CAUTION:
Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell™
is not covered by your warranty.
CAUTION:
To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal
surface (such as a connector on your computer).
CAUTION:
To help prevent damage to the system board, remove the main battery (see
computer.
You can increase your computer memory by installing memory modules on the system board. See "Specifications" in the Setup Guide that shipped with your
computer or at support.dell.com/manuals for information on the type of memory supported by your computer.
NOTE:
Memory modules purchased from Dell are covered under your computer warranty.
Your computer has two user-accessible SODIMM connectors.
Removing the Memory Module(s)
1. Follow the instructions in
Before You
2. Remove the battery (see
Removing the
3. Remove the module cover (see
CAUTION:
To help prevent damage to the memory-module connector, do not use tools to spread the memory module securing clips.
4. Use your fingertips to carefully spread apart the securing clips on each end of the memory-module connector until the memory module pops up.
1
securing clip
2
memory-module connector
3
memory-module
5. Remove the memory module from the memory-module connector.
Replacing the Memory Module(s)
CAUTION:
If you need to install memory modules in two connectors, install a memory module in the lower connector before you install a memory
module in the upper connector.
Begin.
Battery).
Removing the Module
Cover).
Removing the
Battery) before working inside the
Advertisement
Table of Contents
