Subaru Crosstrek 2017 Owner's Manual page 217

Then push the button.
3. The current setting will be displayed.
Push the button to enter the selection
mode.
4. Select On or Off by operating the
or switch. Then push the
button.
5. Select Set by operating the
switch, and confirm the setting by pushing
the button.
6. The system will notify you that the
setting is complete.
Instruments and controls/Multi function display
If the setting is not available, the following
notification will be displayed. In this case,
perform the setting procedure again.
Defogger setting
1. Perform the preparation steps accord-
ing to Preparation for car settings
3-79
3-77.
CONTINUED