Warning And Indicator Lights; Initial Illumination For System Check - Subaru Crosstrek 2017 Owner's Manual

Before that time, the ECO gauge does
not operate.
Instruments and controls/Warning and indicator lights

Warning and indicator lights

Initial illumination for system
check
Several of the warning and indicator lights
illuminate when the ignition switch is
initially turned to the ON position. This
permits checking the operation of the
bulbs.
Apply the parking brake and turn the
ignition switch to the ON position. For
the system check, the following lights
illuminate and then turn off after several
seconds or after the engine has started.
: Seatbelt warning light
(The seatbelt warning light turns off
only when the driver fastens the
seatbelt.)
: Front passenger s seatbelt warning
light
(The seatbelt warning light turns off
only when the front seat passenger
fastens the seatbelt.)
: SRS airbag system warning light
ON / : Front passenger s frontal airbag
ON indicator light
/ : Front passenger s frontal airbag
OFF indicator light
: CHECK ENGINE warning light/Mal-
function indicator light
: Coolant temperature low indicator
light/Coolant temperature high warn-
ing light
: Charge warning light
: Oil pressure warning light
: Engine low oil level warning light
(models with type A combination
meter)
: Windshield washer fluid warning light
(models with type A combination
meter)
: AT OIL TEMP warning light
(CVT models)
: Low tire pressure warning light
(U.S.- spec. models)
/ : ABS warning light
/ : Brake system warning light
: Low fuel warning light
: Hill start assist warning light/Hill start
assist OFF indicator light
: Door open warning light
: AWD warning light (CVT models)
CONTINUED
3-13