Table of Contents
Advertisement
can be cleared.
•
This function is not available.
Self Clean function
Under unit off status, hold "Mode" and "
for 5s to turn on or turn off the self clean function. When the self
clean function is turned on, indoor unit displays "CL" . During the
self clean process of evaporator, the unit will perform fast cooling or
fast heating. There may be some noise, which is the sound of flowing
liquid or thermal expansion or cold shrinkage. The air con-ditioner
may blow cool or warm air, which is a normal phenomenon. During
cleaning process, please make sure the room is well ventilated to
avoid affecting the comfort.
NOTE
•
The self clean function can only work under normal ambient
temperature. If the room is dusty, clean it once a month; if not,
clean it once every three months. After the self clean function is
turned on, you can leave the room. When self clean is finished, the
air conditioner will enter standby status.
Night mode
Under cooling or heating mode, when turning on sleep mode and turn
to low speed or quiet, the outdoor unit would enter into night mode.
NOTE
•
When you feel that the cooling and heating effect is poor, please
press "Fan" button to other fan speed or press "Clock" and "Light"
buttons simultaneously to exit the night mode.
•
The night mode can only work under normal ambient temperature.
I SENSE function
Press "Health" and " + " buttons simultaneously to start I SENSE
function and "
function is set, the remote controller will send the detected ambient
temperature to the controller and the unit will automatically adjust
the indoor temperature according to the detected temperature. Press
"Health" and " + " buttons simultaneously again to turn off I SENSE
" will be displayed on the remote controller. After this
20
" buttons simultaneously
GB
Advertisement
Table of Contents
