Bosch PBH 2500 RE Original Instructions Manual page 12

OBJ_BUCH-1576-006.book Page 12 Thursday, January 28, 2016 1:12 PM
12 | English
An estimation of the level of exposure to vibration should also
take into account the times when the tool is switched off or
when it is running but not actually doing the job. This may sig-
nificantly reduce the exposure level over the total working
period.
Mounting and Operation
The following table indicates the action objectives for mounting and operation of the power tool. The instructions for each action
objective are shown aside. Depending on the type of application, various instruction combinations are required. Observe the
safety instructions.
Action
Inserting SDS-plus Drilling Tools
Removing SDS-plus Drilling Tools
Inserting the Key Type Drill Chuck
(PBH 2100 SRE, PBH 2500 SRE)
Inserting the Keyless Chuck
(PBH 2500 SRE)
*Not available in all countries.
Selecting the operating mode and
rotation direction
Changing the chisel position
(Vario-Lock)
Changing the position of the
auxiliary handle
1 609 92A 1L5 | (28.1.16)
Identify additional safety measures to protect the operator
from the effects of vibration such as: maintain the tool and the
accessories, keep the hands warm, organisation of work pat-
terns.
Figure Please observe
1
2
3
* 4
5
6
7
Page
81
81
82
82
83–84
84
84
Bosch Power Tools