TP-Link TD-9970B User Manual page 30

TD-W9970/TD-W9970B
Get IP with Unicast: This is disabled by default. The minority of DHCP Server of ISP will not

support to enable this. When the Route is connected right but IP cannot get, you can select
this box.
Set DNS Server manually: Choose "Set DNS Server manually", you can set DNS Server

manually here. The modem router will use this DNS Server for priority.
Get IPv6 Address with Unicast: This is disabled by default. The minority of DHCPv6 Server

of ISP will not support to enable this. When the modem router is connected right but cannot
get IPv6 address, you can select this box.
Set IPv6 DNS Server manually: Choose "Set IPv6 DNS Server manually", you can set IPv6

DNS Server manually here. The modem router will use this IPv6 DNS Server for priority.
Host Name: Here displays model No. of your modem router.

Click the Save button to save the settings.
3) PPPoE
If your ISP provides a PPPoE connection and you need to use an ATM Interface, choose PPPoE
in the drop-down list, and then the screen will be displayed as below.
PPP Username/Password/Confirm password: Enter the User Name, Password and

Confirm password provided by your ISP. These fields are case-sensitive.
300Mbps Wireless N USB VDSL/ADSL Modem Router User Guide
Figure 4-7
22