TP-Link TD-9970B User Manual page 13

TD-W9970/TD-W9970B
(Internet)
(Wireless)
(WPS)
(USB)
(LAN1-4)

Note:
1. If the DSL LED is off, please check your Internet connection first. Refer to
Modem Router
for more information about how to make Internet connection correctly. If you
have already made a right connection, please contact your
service is available now.
2. If the Internet LED is off, please check your DSL LED first. If your DSL LED is also off, please
refer to Note 1. If your DSL LED is GREEN ON, please check your Internet configuration. You
may need to check this part of information with your ISP and make sure everything have been
input correctly.
3. You can also refer to
300Mbps Wireless N USB VDSL/ADSL Modem Router User Guide
fails. Please refer to
On
The network is available with a successful Internet connection.
There is no successful Internet connection or the modem router
Off
is operating in Bridge mode. Please refer to
troubleshooting.
On
The wireless function is working properly.
Off The wireless function is disabled.
It turns on when a wireless device has been successfully
On/Off
connected to the network via WPS. After about 5 minutes, the
WPS LED will turn off.
WPS handshaking is in process and will continue for about 2
minutes. Please press the WPS/RESET button on other wireless
Flash
devices that you want to add to the network while the LED is
flashing.
On
The USB device is identified and ready to use.
Flash
The USB device is being identified.
Off No USB device is plugged in to the USB port.
On
There is a device connected to this LAN port.
Off
There is no device connected to this LAN port.
4.8.2 WPS Settings
Note 1
for troubleshooting.
ISP to make sure
for more information.
5
Note 2 for
2.3 Connecting the
if your Internet