Supero FatTwin F628R3-FT User Manual page 111

Table of Contents

Advanced Power Management Conﬁ guration

Advanced Power Management Conﬁ guration

Power Technology

Select Energy Efﬁ cient to support power-saving mode. Select Custom to customize

system power settings. Select Max Performance to optimize system performance.

Select Disabled to disable power-saving settings. The options are Disable, Energy

Efﬁ cient, and Custom.

If the option is set to Energy Efﬁ cient or Custom, the following items will display:

Conﬁ g TDP (Conﬁ guring Thermal Design Power)

Select Enable to conﬁ gure TDP power settings to enhance thermal management

for the CPUs. The options are Enable and Disable.

Conﬁ g TDP Level (Available when Conﬁ g TDP above is set to Enable)

Use this item to set TDP configuration level to enhance CPU thermal

management. The options are Nominal, Level 1, and Level 2.

CPU P State Control (Available when Power Technology

is set to Custom)

EIST (P-states)

EIST (Enhanced Intel SpeedStep Technology) allows the system to automatically

adjust processor voltage and core frequency to reduce power consumption and

heat dissipation. The options are Disable and Enable.

Turbo Mode

Select Enabled to use the Turbo Mode to boost system performance. The options

are Enable and Disable.

P-state Coordination

This feature is used to change the P-state (Power-Performance State)

coordination type. P-state is also known as "SpeedStep" for Intel processors.

Select HW_ALL to change the P-state coordination type for hardware

components only. Select SW_ALL to change the P-state coordination type for

all software installed in the system. Select SW_ANY to change the P-state

coordination type for a software program in the system. The options are HW_All,

SW_ALL, and SW_ANY.

7-9

Chapter 7: BIOS

Table of Contents