Removing the plastic cover for bulb
replacement
The bulb in the halogen headlamp can be
replaced without the help of a workshop, but the
plastic cover over the headlamp must be
removed before a bulb can be replaced.
Press down the pins into the plastic cover's
–
four clips using a screwdriver or similar and
lift away the cover.
LED (Light Emmitting Diode)
16
NOTE
Points to remember when the cover is refit-
ted:
The pin in the clip needs to be pressed
•
back fully before the clip is refitted in the
cover.
When the cover is refitted, the pin must
•
be pressed in until the end surface is
level with the surface of the clip.
Related information
Bulb replacement (p. 608)
•
Replacing the dipped beam bulb (p. 610)
•
Replacing the main beam lamp (p. 611)
•
Replacing daytime running light bulb/posi-
•
tion lamp bulb, front (p. 612)
Replacing the front direction indicator bulb
•
(p. 613)
Bulb specifications (p. 617)
•
MAINTENANCE AND SERVICE
Exterior lamp positions
The exterior lighting of the car uses a number of
16
different lamps. An LED
type lamp must be
replaced by a workshop. An authorised Volvo
workshop is recommended.
Lamps, front (car with halogen
headlamps)
Dipped beam
Main beam
Daytime running lights/position lamps
Indicator
Front fog lamps/cornering lights* (LED)
}}
609
* Option/accessory.