Features And Benefits - Rinnai REU- A1620WD-IND Operation And Installation Manual

1.1 FEATURES AND BENEFITS

Congratulations on purchasing the latest technology temperature controlled Rinnai continuous flow water heating
system.
The Rinnai continuous flow water heater products NEVER RUN OUT of hot water. Whilst electricity, water and gas
supplies are connected, hot water is available whenever hot water taps are open.
Built into the main micro-processor is the facility to LIMIT THE MAXIMUM TEMPERATURE of the hot water
supplied. The water temperature may be limited to various values. This is particularly useful when the hot water unit
is installed where young children or the infirm may be using the hot water.
The Rinnai continuous flow water heater products are fan-assisted (power flued) appliances. This makes them
COMPACT, saving both floor and wall space.
The temperature of hot water is CONSTANTLY MONITORED by a BUILT-IN SENSOR. If the temperature of the hot
water rises to more than 3°C above the selected temperature the burner is turned OFF and only turned ON again
when the temperature falls below the selected temperature.
The burner lights automatically when the hot water tap is opened, and goes out when the tap is closed. IGNITION IS
ELECTRONIC, so there is no pilot light. When the hot water tap is off, no gas is used.
'Deluxe' or 'Universal' Water Controllers are available as an optional extra. Depending on the models chosen, these
offer the following features:
- Bath fill function (Deluxe Bathroom Control Only).
- Voice Prompting (Deluxe Control Only).
- Clock (Deluxe Control Only).
- Up to four water controllers can be fitted.
For further information regarding Deluxe water controllers please contact the authorised Rinnai service company.
The "Smartstart®" system when fitted can pre-heat the water in the pipe-work between the water heater and the hot
water outlets. This results in water savings and reduces waiting time for heated water at the outlets.
Operating NOISE LEVEL IS VERY LOW.
6