System
Setting the base ringtone
¤
. . . use
then
Set the volume:
Set the ringtone:
Save the setting:
Changing the system PIN
Secure the telephone's system settings with a system PIN. You have to enter the system PIN
when you register or de-register a handset, change local network settings, perform a firmware
update or reset the phone to default settings.
Change the telephone's 4-digit system PIN (default setting: 0000):
¤
. . . use
OK
. . . use
to enter the current PIN (if other than 0000)
new system PIN
Resetting system PIN
Resetting the base station to the original PIN 0000:
¤
Unplug the network cable from the base station
key on the base station
station
Press and hold the key for at least 5 secs . . . the base station is reset and the system
PIN is set to 0000
All handsets are de-registered and must be re-registered. All settings are returned to
default settings.
Restoring the phone to default settings
When the settings are reset
•
the date and time are retained,
•
handsets are still registered,
•
the system PIN is retained,
•
Maximum Range is activated and No Radiation is deactivated.
¤
. . . use
OK
. . . use
to enter system PIN
takes around 10 seconds
68
to select
Audio Settings
¤
Volume: . . . Use
(rising volume).
¤
Melody
¤
Save
to select
Settings
Save
At the same time reconnect the network cable to the base
to select
Settings
OK
OK
Ringtones (Base)
to set the volume at 5 levels or set a crescendo
. . . Use
to select the ringtone
OK
System
Press and hold the Registration/Paging
OK
System
Yes . . . the base station is restarted. The restart
OK . . .
OK
System PIN
OK
. . . use
to enter
OK
Base Reset