Page 1
SB300 CNTR Harman Consumer,Inc Powered soundbar quick-start guide thank You For chooSIng thIS JBl Product ® The SB300 is a two-piece home theater speaker system that We’re confident that this JBL system will provide every note includes a powered stereo soundlbar speaker, a wireless 8-inch of enjoyment that you expect –...
SoundBar rear-Panel controlS and connectIonS Wireless Pairing switch: Press this switch to initiate wireless pairing NOTE: You can connect different source components to the analog and between the soundbar and the wireless subwoofer. See Pairing the digital connections. Units for Wireless Operation , on page 6, for more information Power cord connector: Connect the included power cord here.
SuBWooFer rear-Panel controlS Status Power Switch Level Control Cutoff Control Phase Switch Power Cord Connector Wireless Pairing Switch status Led: Indicates the subwoofer's operational status: Wireless Pairing switch: Press this switch to initiate wireless pairing between the subwoofer and the soundbar. See Pairing the Units for Lights blue continuously when the subwoofer is on and linked to the •...
SPeaker Placement PLaciNg tHe sOuNdBar ON a taBLe PLaciNg tHe suBWOOFer If your TV is placed on a table, you can place the soundbar on the table The performance of a subwoofer is directly related to its placement in directly in front of the TV stand, centered with the TV screen. As long the listening room and its physical position relative to the other speakers as the surface of the table is flat, the soundbar will rest on its rubber in the system.
Page 5
connectIonS sOurce cONNectiONs NOTE: If your DVD player, cable tuner or satellite tuner does not have an optical digital output, you can connect its analog audio output to your analog: Use the supplied stereo audio cable to connect the soundbar’s TV.
uSIng Your SoundBar SYStem turNiNg tHe sOuNdBar ON aNd OFF PairiNg tHe uNits FOr WireLess OPeratiON Set the soundbar’s Power switcn to the “On” position. After turning the soundbar and subwoofer on for the first time, you will need to “pair” the subwoofer and soundbar so they both operate at the same wireless frequency.
SPecIFIcatIonS suBWOOFer LeVeL kNOB Use the subwoofer’s Level knob to balance the bass with the rest of the sound. Play music or movies that you are familiar with, and adjust sB300 sYsteM the subwoofer’s Level knob so the bass sounds balanced on both music and films.
NOTE: Changes or modifications not expressly 8. Do not install this apparatus near any heat OF ELECTRIC SHOCK TO PERSONS. approved by HARMAN could void the user’s sources such as radiators, heat registers, stoves or other apparatus (including authority to operate the equipment.