Paper Jam In Exit Area - Samsung Xpress M282 Series Service Manual

Mono laser printer
Hide thumbs Also See for Xpress M282 Series:
Table of Contents

Advertisement

4. Troubleshooting
► Error Code
M3–1110
► Error message

Paper Jam in exit area.

► Symptom
A paper jam was detected in the exit area.
► Troubleshooting method
1) Open the rear cover. Remove the jammed paper. (Refer to 4.1.3 Jam removal)
2) Check if the Guide-Change Duplex of the rear cover is defective.
3) Check if the exit sensor and actuator is working normally.
4-31
Copyright© 1995-2013 SAMSUNG. All rights reserved.

Advertisement

Table of Contents
loading

Table of Contents