Charging The Battery - Shark Cordless Pro IZ531H Owner's Manual

CHARGING THE BATTERY

USING THE LI-ION CHARGER
LI-ION CHARGER
Plug the Li-Ion Charger into a wall outlet.
OUT OF THE VACUUM
If battery is removable (IZ560H Series), press and
hold the Battery Release Button, then slide out the
battery. Plug the charger into the charging port on
the battery. To reinstall the battery, slide it into the
slot in the back of the handheld vacuum.
s h a r kc l e a n . c o m
IN HANDHELD VACUUM
To charge the battery inside the handheld vacuum,
connect the charger to an electrical outlet, then
insert the charger plug into the port below the
handle on the handheld vacuum.
POWER ON/OFF
Press power button to turn the vacuum on or off.
NOTE: The unit will not turn on if the charger is connected. Unplug the charger before turning on vacuum power.
CARPET SETTING
To vacuum in carpet mode, press the floor select
button until the carpet icon ( ) illuminates. The
brushroll will spin faster to pick up debris below
the surface of your carpets.
SETTINGS
HARD FLOOR SETTING
To vacuum in hard floor mode, press the floor select
button until the hard floor icon ( ) illuminates. The
brushroll will spin slowly to clean bare floors and
small area rugs.
SUCTION MODE DISPLAY LIGHTS
Off
Deep Clean
SUCTION POWER MODES
Press the ( ) button to toggle between ECO,
Deep Clean, and Boost modes. To save battery
power, select ECO mode. For everyday cleaning
power, select Deep Clean. For an extra burst of
power, select Boost mode.
sharkclean.com
ECO
Boost