Viking E-10-WHA Product Manual

DESIGNED, MANUFACTURED AND SUPPORTED IN THE USA
VIKING
SECURITY & COMMUNICATION
Provide Convenient Handsfree Communication
The E-10A, E-10-WHA and E-20B are telephone line
powered speaker phones that provide straightforward
two-way handsfree communication. All units function
identically, but are available in different housings to
better suit the application. When the "Call" button is
pressed, the speaker phone will come off-hook and
will remain off-hook until one of the following happens:
a CPC signal is detected, the programmed timeout
has elapsed, a busy signal is detected, or the call goes
silent, making the unit automatically disconnect.
The speaker phone can be connected directly to a
C.O. line or analog PABX/KSU station when
programmed as a ringdown circuit, or used with a
Viking Dialer. If a line or station is not available,
Viking's DLE-200B ring down circuit can be used.
One to four speaker phones can share an existing
phone line in a house or small business when used
with a Viking C-200, C-250, C-500, or C-2000B
Controller.
Features
• Alternate action call button to place or cancel a call
• Intelligent call progress detection for automatic hang-
up on CPC, silence, busy signal, or time out
• Telephone line powered
• Weather resistant features: mylar speaker, gaskets,
internally sealed push button switch, UV stable
exterior, enamel coated PCB
• E-10A-EWP, E-10-WHA-EWP and E-20B-EWP are
designed to meet IP66 Ingress Protection Rating
• Adjustable microphone and speaker volume
• Programmable maximum call length
• Selectable auto-answer feature allows remote
monitoring
• Two way handsfree communication
• Programmable VOX (mic/speaker) switching speed
E-10A, E-10WHA Features:
- Vandal resistant, black or white powder painted,
aluminum face plate with heavy duty 316 stainless
steel call button and mounting gasket
- Flush mountable using included plastic rough-in box
part number - 259576
- Surface mount with optional VE-5x5 (DOD 424)
- T-10 Torx Security Screws
E-20B/E-20B-EWP Features:
- Light gray colored, impact resistant, U.V. stable,
plastic chassis
- Surface mountable only
www.VikingElectronics.com
Information: 715-386-8861
PRODUCT
MANUAL
E-10-WHA
E-10-WHA-EWP
For outdoor installations models E-10A-EWP,
E-10-WHA-EWP and E-20B-EWP come eqipped with
Enhanced Weather Protection (EWP). EWP products
are designed to meet IP66 standards and may feature
foam rubber gaskets and boots, sealed connections,
gel-filled butt connectors, as well as potted circuit
boards with internally sealed, field-adjustable trim pots
and DIP switches for easy on-site programming. For
more information, see DOD 859.
Use as a Handsfree Speaker Phone for:
• Courtesy communication
• Delivery entrances
• Parking lots and ramps
• ATM machines
• Convention centers
• Stadiums
• Building lobbies
• Pedestrian gates
• Residences
• Businesses
Power: Telephone line powered (18 VDC/20mA minimum)
Dimensions: E-10A: Overall: 5" x 5" x 2.25" (127mm x 127mm
x 57.2mm), Rough-in box: 4" x 4" x 2.25" (102mm x 102mm x
57mm) E-20B: 5.5" x 4.5" x 1.7" (140mm x 115mm x 43mm)
Shipping Weights: E-10A: 2 lbs (0.91 kg), E-20B: 1.5 lbs (.75 kg)
Operating Temperature:-30° F to 150° F (-34° C to 65° C)
Humidity - Standard Models: 5% to 95% non-condensing
Humidity - EWP Models: up to 100% condensing
Speaker Volume: Approximately 70db maximum @ 1m
Ring Voltage: 25V AC RMS minimum
CPC Disconnect Time: 300ms minimum
REN: 0.8A
Connections: (2) gel-filled butt connectors
E-10A/EWP Series
E-20B/EWP
Speaker Phones
E-10A
E-10A-EWP
Flush Mount, White or Black
Powder Painted Aluminum
Applications
Specifications
February 9, 2021
E-20B / E-20B-EWP
Surface Mount,
Light Grey UV Stable
Plastic Chassis