Download Print this page

Viking K-1900-8 Technical Practice

Advanced door/gate entry phone controller
Hide thumbs Also See for K-1900-8:

Advertisement

TECHNICAL
TECHNICAL
T
T
E
L
E
E
L
E
The C-2000A allows single line phones or phone
systems to share a phone line with 1-4 entry
phones. Tenants may answer an entry phone call,
converse with the visitor and activate a contact
closure to control electronic gates or door strikes.
The C-2000A provides "Caller ID" and will also
provide "Call Waiting Caller ID" and a "Call
Waiting" tone when the phone line is in use.
Tenants may gain entry at each gate by entering a
Touch Tone keyless entry code.
Tenants may call out to each entry phone for monitoring purposes. An auxiliary input
is also available for connecting a lighted doorbell switch, a common garage door open-
er/receiver or an auxiliary keyless entry keypad.
F
e
a
t
u
r
e
s
F
e
a
t
u
r
e
s
• Allows 1-4 entry phones to share a single telephone
line with a residential or business telephone system
• Compatible with the following Viking entry phones:
- E-10A, E-20B, E-30, E-35, E-40 and E-50 Phones
- K-1500-7 Stainless Steel Panel Phone
- K-1700-3 and K-1705-3 Phone with Keypad
- K-1900-8 Stainless Steel Phone with Keypad
- Or use with any analog touch tone phone
• Provide entry phone activated chimes and whole
house paging when used with Viking model SLP-1
• Up to 6 different keyless entry codes / "one time
use" keyless entry codes per entrance
• Up to 6 master keyless entry codes for use at
any entrance
• Optional "Privacy Number" allows only selected
visitors to call from an entry phone
• Provides "Caller ID" and "Call Waiting Caller ID"
• Produces "Call Waiting" tones
• Lighted doorbell switch input to activate entry
phone call
• One set of normally open and normally closed
contacts available for each entry phone (a second
set is available on solder pads)
• Programmable contact activation time
• Auxiliary input to activate timed auxiliary contacts
• Realistic call progress tones
S
S
C
O
M
O
L
U
T
I
O
N
S
C
O
M
O
L
U
T
I
O
N
S
Add 1-4 Entry Phones and Doorstrike
Control to an Existing Phone Line
2
1
C
2
1
C
F
O
R
T
H
E
S
T
F
O
R
T
H
E
S
T
A
p
p
l
i
A
p
p
l
i
• Add one to four entry phones to your standard home or
office phones to provide:
- Door communication
- Door entry
- Gate entry
- Keyless entry
• Provide commercial or residential security via two-way
handsfree communication at the door and gate
• Connects in series with a single phone line or to a
phone system's unused line input (loop start trunk input)
S
p
e
c
S
p
e
c
Power: 120VAC / 13.8VAC 1.25A, UL listed adapter provided
Dimensions: 210mm x 159mm x 45mm (8.25" x 6.25" x 1.75")
Shipping weight: 1.5kg (3.2 lbs.)
Environmental: 0°C to 32°C (32°F to 90°F) with 5% to 95%
non-condensing humidity
Relay Contacts: 5A @ 30VDC/250VAC
Ring Output: 8 REN, capable of ringing (16) 0.5 REN phones
Talk Battery: 40V DC
REN: 0.1A
Connections: (30) cage clamp screw terminals
C-2000A
C-2000A
Advanced Door/Gate
Entry Phone Controller
E
N
T
U
R
Y
E
N
T
U
R
Y
c
a
t
i
o
n
s
c
a
t
i
o
n
s
i
f
i
c
a
t
i
o
n
s
i
f
i
c
a
t
i
o
n
s
June 2, 2008

Advertisement

loading

Summary of Contents for Viking K-1900-8

  • Page 1 • Allows 1-4 entry phones to share a single telephone line with a residential or business telephone system • Compatible with the following Viking entry phones: - E-10A, E-20B, E-30, E-35, E-40 and E-50 Phones - K-1500-7 Stainless Steel Panel Phone...
  • Page 2 Relay Contact Output N.C. Entry Phone 2 Input N.O. * Door Strike 2 Relay Contact Output N.C. Viking Electronics, Inc., 1531 Industrial Street, Hudson, WI 54016 (715) 386-8666 VIKING MODEL C-2000A © VIKING ELECTRONICS HUDSON, WI 54016 ADVANCED DOOR/GATE AND...
  • Page 3 * Earth C.O. / Phone Tone House Ground Line Input Phone(s) (optional) Many different Viking door phones may be used in com- bination with the C-2000A. For more information, see Entry Phone 1 Operation section G. (E-40-PB shown, not included) B.
  • Page 4 (included) COMM 26 27 28 29 30 PROGRAM PHONE Need More Information on the ES-1? Call (715) 386-4345 and select 193. 5A@30VDC/ 250VAC maximum Viking HID-1 Doorstrike/ Proximity Card Magnetic Lock Reader (not included) C-2000A VIKING MODEL C-2000A © VIKING...
  • Page 5: Security Code

    3. Accessing the Programming Mode Remotely Step 1. Call into the C-2000A from a Touch Tone phone. Note: Step 2. Answer the call from any house phone (device) connected to terminals 4 & 5, LINE OUT TO PHONES. Step 3. From either phone enter ,# followed by the six digit security code (factory set to 845464, see Programming section C). Step 4.
  • Page 6 The number of times an entry phone call will ring the house phones can be limited in programming. The programmable maximum ring count must be 2 digits and is stored in location “#61”. The maximum ring count is programmable from 1 - 99 and factory set to (05) 5 rings. VIKING © DIP Switches shown...
  • Page 7 L. Doorbell Switch Input and Auxiliary Contact Output 1. Doorbell Mode (DIP Switch 1 ON - factory setting) With the C-2000A in the doorbell mode (DIP switch 1 ON), a normally open switch (SPST 6-16V lighted or non-lighted doorbell button, etc.) can be connected to terminals 26 and 27 (DOORBELL SWITCH / AUX INPUT). This switch should be located near entry phone 1.
  • Page 8 Doc 178) Due to the dynamic nature of the product design, the information contained in this document is subject to change without notice. Viking Electronics, and its affiliates and/or subsidiaries assume no respon- sibility for errors and omissions contained in this information. Revisions of this document or new editions of it may be issued to incorporate such changes.

This manual is also suitable for:

C-2000aE-10aE-20bE-30E-35E-40 ... Show all